Automatic Density Meter

Automatic Density Meter

Density is a fundamental physical property that can be used in conjunction with other properties to characterize the quality of crude oils, light and heavy fractions of petroleum and petroleum products. The test method covers the determination of the density or relative density of crude oils, petroleum distillates and viscous oils that can be handled in a normal fashion as liquids at test temperatures between 15 and 35°C.

$5,000.00

Description

The Automatic Cleveland Open Cup Flash Point Analyzer is the
latest addition to the Koehler Flash Tester family of products.
This unit is robustly designed using state-of-the-art technology to
allow for seamless testing in accordance with ASTM procedure.
The system software runs on an integrated processor PC running
the latest Windows operating system. The 10.4” touch screen
interface fully displays all operator parameters and results on a
single screen. Data results can be stored on the local hard drive.
An integrated Dual Fan System directly cools the test cup and the
environment around the cup.

Additional information

Loading Option

Horizontal Load
Ideal for: Laboratories that make only a few measurements per day. Users who wish to use very small amounts of sample – Only 1mL of sample is required.

Vertical Load
Sample loading is done with gravity and bubbles float to the top of the syringe. Suitable for left and right handed operators as opposed to traditional manual horizontal injection. Syringe plunger is easier to push with all samples and there is more control over the syringe than with Horizontal Load.

Ideal for: Laboratories that will make several measurements per day but are not looking for an automated or semi-automated loading option.

LoadAssist
LoadAssist provides two options for sample loading: by manual injection or having the PeriPump pull the syringe

Ideal for: Laboratories that have multiple inexperienced users to ensure that the samples are automatically injected the same way every time.

MM Peri Pump
Most versatile option. Allows three sample loading options: through the supplied needle, manual vertical injection with a syringe or having the PeriPump draw the sample into the instrument.

Ideal for: Laboratories looking for versatility that have multiple inexperienced users to ensure that the samples are automatically injected the same way every time.

AutoFill
Automatically loads samples into the system for testing.

Ideal for: Laboratories that will make several measurements per day and do not have concerns about using very small amounts of sample – Around 50mL of sample is required.
Features

Conforms to ASTM D92 and related specifications
Simple automation routine for easy operation
Flash point operation for samples with an open cup flash point below 79°C
Fire suppression system floods the instrument with inert gas in the event of a fire
Equipped with Emergency Safety Switch
Included Accessories

1 ea. UKAS Water Density Standard
IQ/OQ Documentation
6 pcs. K86220- 3 mL Syringe with Elastomeric tipped plunger
6 pcs. K86221 3 mL Luer Slip Tip Syringe
Waste Collection Flask K86232
6 feet of Silcone hose 1/8"ID x 3/16"OD K86229
2pcs. of Luer Male Plug K86218
4pcs. of Hose barbed/Male Luer Adapter K86214
2pcs PTFE Fill Nozzel
2pcs. Female Luer to 1/4" – 28 thread, ETFE
2pcs. Female Luer Lok to 1/4" – 28 thread, ETFE
2pcs. Barbed to 1/4" – 28 thread, UNF, ETFE
1 ea. K86224 Small Phillips head Screw Driver
K86223 Nozzle Repair Tool
Power Supply K86225 and Power Cord K86226
Specification

Conforms to the specifications of: ASTM D1250, D4052, D5002, D5931; ISO 91, 12185; DIN 51757; IP 365

Accuracy
Density
Model A: 0.00005 g/cm³
Model B: 0.0001 g/cm³
Model C: 0.00001 g/cm³
Model D: 0.0002 g/cm³

Temperature
Model A: 0.02°C
Model B: 0.03°C
Model C: 0.01°C
Model D: 0.05°C

Repeatability
Density
Model A: 0.000005 g/cm³
Model B: 0.00005 g/cm³
Model C: 0.000002 g/cm³
Model D: 0.00002 g/cm³

Temperature
Model A: 0.01°C
Model B: 0.02°C
Model C: 0.001°C
Model D: 0.02°C

Resolution
Density
Model A: 0.00001 g/cm³
Model B: 0.0001 g/cm³
Model C: 0.000001 g/cm³
Model D: 0.0001 g/cm³

Temperature
Model A: 0.01°C
Model B: 0.01°C
Model C: 0.001°C
Model D: 0.01°C

Measurement Ranges:
Density: 0 to 3 g/cm³

Temperature: 0°C to 100°C

Pressure: 0 to 10 bars

Measurement Modes: Continuous, Single, Multiple

Wetted Materials: Borosilicate glass, Teflon (PTFE, ECTFE)
Display: 10.4 inch diagonal, 800-600 pixels, color, Flat Panel Monitor with Resistant Touch Screen Interface, 200 bit brightness, gasketed for spill protection.
Communication Interface: Touch Screen User Interface
5 – USB Ports
2 – Ethernet Ports
1- HDMI Port
2 – RS232 Ports
Keyboard, Bar Code Scanner, Mouse, Network Capabilities
Video and Magnification: Video assisted view of cell, capable of approximately 10X magnification

Internal Memory: 32 GB Non-removable Compact Flash
Electrical Requirement

85 to 260 VAC; 48 to 62 Hz
150- 200 Watts
Dimension

lxwxh, cm: 18x11x21 in. (46x28x53 cm)
Net Weight: 53 lbs (24 kg)

Related products